Comment submitted by DJ Don G., "The gig went great....used the receivers with one at 150' and the other at 250'.  They  both received well with no interference......The people who hired us were thrilled." 

The first (and only) wireless stand alone audio transmission system for active speakers

Specifications:

• Transmitter: 1U rack mount 8" deep.  

• Selectable AC or DC operation. Run time up to 10 hrs. per charge. Recharge time 7 hrs.

• Left / Right  signal adjustment W/ sig. / clip LED.

• 16 Channel selectable freq.

• DC. V. meter.

• Includes 12V DC power supply.

• Transmission distance approx. 300' line of sight. 

• L. & R. - XLR & RCA Line In.

• Receiver's: 1 left and 1 right.  Dem.: 7.5" L. X 4.5"D.  X 2.5"H.

• Selectable AC or DC operation. Run time up to 20 hrs. per charge. Recharge time 8 hrs.

• Mounting flange.

• 16 Channel selectable freq.

• Includes two 6V. DC power supply.

• XLR Line Out.

• Model No.: UHF16.01

MSRP: $995             Price: $795 FREE UPS Ground shipping. (quantity discounts of 2 or more available)

* The UHF16.01 Wireless system is compatible with future wireless system components from DJW Audio.

• Transmitter:  Dual Channel                                      Receiver's:  Single Channel

• RF Freq.: 614 – 870 MHz                                           RF Freq.: 614 – 870 MHz

• Digital transmission (PLL)                                        Selectable Channels:  16 '

• Selectable Channels:  16                                         Stability:  + / - .005%

• Bandwidth:  24 MHz                                                 S/N  >100 dBm

• Power Output:  50mW                                              Rejection:  75dB

• Frequency Response:  50Hz – 19KHz.                      THD. :  -.5%

• Power:  12VDC                                                        Power:  6VDC

DJW Audio Passive Ultra Lite 12 

FREE SHIPPING!!  2 or more pairs 10% off - Limited Time Intro. Offer !!

Weighs only 24 lbs. - Quit lugging heavy speakers around ! Time tested design. 400W coming soon !!

Specifications:

• 12" Two Way - 200 Watts RMS (No bass bin required).

• Grey or Black Carpet covered - your choice.

• Dimensions: Wedge Design - 16.5" W. x 16" D. x 24" H.

• Accepts 1-3/8" speaker stand.

• Weight: 24 lbs.

Model # ULT12

MSRP: $679.00               DJW Price: $499 Pair. 

16 Channel UHF Wireless AC / DC Receiver Set

 Specifications:

• Receiver's: 1 left and 1 right.  Dem.: 7.5" L. X 4.5"D.  X 2.5"H.

• Selectable AC or DC operation. Run time up to 20 hrs. per charge. Recharge time 8 hrs.

• Mounting flange.

• 16 Channel selectable freq.

• Includes two 6V. DC power supply.

• XLR Line Out.

• Model No.: UHF16.01R

MSRP: $499             DJW Price: $369.95 (quantity discounts of 2 or more sets available)

* The UHF16.01 Wireless system is compatible with future wireless system components from DJW Audio.

• Receiver's):  Single Channel

• RF Freq.: 614 – 870 MHz

• Selectable Channels:  16

• Stability:  + / - .005%

• S/N  >100 dBm

• Rejection:  75dB

• Frequency Response:  50Hz – 19KHz. 

• THD. :  -.5%

• Power:  6VDC

16 Channel UHF Wireless AC / DC Transmitter

Specifications:

• Transmitter: 1U rack mount 8" deep.  

• Selectable AC or DC operation. Run time up to 10 hrs. per charge. Recharge time 7 hrs.

• Left / Right  signal adjustment W/ sig. / clip LED.

• 16 Channel selectable freq.

• DC. V. meter.

• Includes 12V DC power supply.

• Transmission distance approx. 300' line of sight. 

• L. & R. - XLR & RCA Line In.

• Model No.: UHF16.01T

MSRP: $619.95             DJW Price: $455   (quantity discounts of 2 or more available)

* The UHF16.01 Wireless system is compatible with future wireless system components from DJW Audio.

• Transmitter:  Dual Channel

• RF Freq.: 614 – 870 MHz.

•  Digital transmission (PLL)

• Selectable Channels:  16

• Stability:  + / - .005%

• Bandwidth:  24 MHz

• Power Output:  50mW 

• Frequency Response:  50Hz – 19KHz.

• THD. :  -.5%

• Frequency Response:  50Hz – 19KHz.

• Power:  12VDC  

GO WIRELESS-NO MORE SPEAKER CABLES

PHONIC WM-SYS4 (Stereo System)

Wireless system linking mixers to powered speakers
Stand-alone UHF wireless receiver – 16 selectable channels
RF carrier frequency range 614-870Mhz
Antenna: external, threaded connector
Internal squelch and mute circuit mode can resist extraneous noise

$355.00 FREE FREIGHT
WM-400 UHF ADDITIONAL RECEIVER, $89.00 FREE FREIGHT

READ THE REVIEW OF THIS SYSTEM IN THE NOVEMBER, 2007 ISSUE OF MOBILE BEAT MAGAZINE (PAGE 88)

GO WIRELESS-NO MORE SPEAKER CABLES

PHONIC WM-SYS3 (Mono System)

Wireless system designed to link mixers to powered speakers
Stand alone wireless UHF receiver
16 user selectable frequencies
Antenna: external, threaded connector
Audio output connectors: XLR out

$189.00 FREE FREIGHT

READ THE REVIEW OF THIS SYSTEM IN THE NOVEMBER, 2007 ISSUE OF MOBILE BEAT MAGAZINE (PAGE 88)

GO WIRELESS-NO MORE SPEAKER CABLES

PHONIC Performer A540

Wireless powered speaker
15’ 2-way 400 watts

$439.00 FREE FREIGHT



• Wireless modules eliminate need to lay speaker cable - making setup faster and easier
• Wide dispersion horns give wide audience coverage for highs and lows
• Speaker protection circuitry and transducer-matched HF and LF amps drive speakers at maximum levels without burning them out
• Works in all sound reinforcement applications and as a floor monitor
• Weatherproof, lightweight, impact-resistant plastic enclosure
• Active speaker technology means higher sound quality with lower distortion

Performer active speakers have the option of wired of wireless operation, giving you incredible flexibility when hooking them up to your PA system. They can be used with a wireless microphone with very little setup and no audio cables required. Or, a wireless mixer module can be used to wirelessly transmit the signal from the mixer to the Performer active speakers in mono or stereo image, making this truly the world's first wireless PA speaker. Convenience - wireless transmission from microphone to speaker Performer Active Speakers work together with wireless mics up to 300 ft away. Install a Phonic UHF wireless microphone module* in the compartment on top and you're ready to go. Installation is quick and easy and there are no cables or bulky receivers. Setting up a speaker and wireless microphone has never been this easy! Flexibility - wireless transmission from speaker to speaker Choose between laying speaker cable or go completely cable-free. Performer Active Speakers utilize 2.4 GHz wireless modules* to communicate with other Performer speakers up to 100 ft away. Place speakers wherever you want and move them on a moments notice. And don't worry about sound quality. Wireless delivers the same crisp highs, punchy mids and tight steel-fisted bass that you get with cable. Simplicity-Wireless transmission from mixer to speaker Lose the cables and transmit wirelessly from mixer to speaker. You select mono or stereo transmission and the Stand-Alone Wireless Transmission Module (WM 60)* does the rest. Place your speakers anywhere up to 100 ft away from the mixer and get crystal clear sound - wirelessly. Why didn't someone think of this sooner? *Wireless modules sold separately


WM 60 UHF Mono Wireless Transmitter
Transmits mono audio signal to speakers.
105.00 FREE FREIGHT

WM 400 UHF Universal Wireless Receiver
Receices signal from wireless mic & speakers with transmitters

$89.00 FREE FREIGHT